fuguseed(7)
NAME
fuguseed — make 12
seed words with three dice, on paper
DESCRIPTION
This procedure makes 12 seed words with three dice and one printed word sheet. The dice give all of the entropy. No program gives entropy to a word, and no program on this page rolls a die.
WARNING: The 12 words are the whole secret. A person who reads the words gets the seed. A loss of the words is irreversible: no person and no program can make them again. Keep the paper in a safe place, and show it to no other person.
The equipment and the names
Get these items:
- The word sheet of fuguseed-words(1), printed on A4 paper, on both sides, at 100 percent scale, and in color.
- Three dice: one d8 with the faces 1 to 8, and two d16 with the faces 1 to 16. Give one color to each die: YELLOW to the d8, BLUE to one d16, and RED to the other d16.
- Two sheets of paper for the words, and a pen.
- A cup, or a box, for the throw of the dice.
The names of the dice are the names on the sheet. YELLOW gives the block, BLUE gives the row, and RED gives the column. The word "device" on this page is the equipment that reads the 12 words at the end.
NOTE: The faces 6 and 9 of a d16 read the same upside down. A die with a line below the number shows which one it is. With a die without that line, turn the die so that the other numbers of the face read correctly.
The steps before the start
Do these steps first:
- Find a room with no other person, no camera, and no window at your back.
- Print the word sheet, and check the print against the file with fuguseed-words(1).
- Write the numbers 1 to 12 on the first sheet of paper, one number for each line.
- Throw each die 10 times, and read the results. A die that gives one face 5 times or more is a bad die. Get another die.
How to find one word
Each of the words 1 to 11 needs one throw of the three dice. Do these steps for one word:
- Put the three dice in the cup, and throw them on the table.
- Read the YELLOW die. It gives the block, 1 to 8. The blocks 1 to 4 are on side 1 of the sheet, and the blocks 5 to 8 are on side 2.
- Find the table of that block. The caption of the table holds the word YELLOW and the number.
- Read the BLUE die. It gives the row, 1 to 16. Find the row with that number in the first column.
- Read the RED die. It gives the column, 1 to 16. Find the column with that number in the first row.
- Read the word in the cell of that row and that column.
- Write the word on the line of its position.
Do not throw a die again because you do not like a word. Each throw gives one word, and the procedure keeps that word. Throw again only to correct a wrong word 12.
The words 1 to 11
Find the words 1 to 11 with the steps above, one word for each line.
Read the 11 words again, and compare each word with the sheet. Each word must be complete and correct.
The word 12
Word 12 is the check word. The YELLOW die and the BLUE die give its block and its row. Do not throw the RED die for word 12. The checksum of the 12 words is correct for one word of that row only, and fuguseed-last(1) finds that word.
Do these steps:
- Put the YELLOW die and the BLUE die in the cup, and throw them on the table.
- Read the YELLOW face and the BLUE face.
- Start fuguseed-last(1) on an air-gapped computer.
- Type the words 1 to 11 on the first line, with a space between two words.
- Type the YELLOW face and the BLUE face on the second line, with a space between the two faces.
- Write the word that the program prints on the line of word 12.
The check word carries no entropy: it is a function of the other bits. The YELLOW block and the BLUE row of word 12 stay the throw of the dice.
Then run fuguseed-qr(1) on the 12 words, as the steps below state. When fuguseed-qr(1) reports a wrong checksum, compare the 12 words that you typed with the paper, word for word. Do the same when it reports that word 12 is not in the word list. When a typed word is different from the paper, correct the word. Then run fuguseed-qr(1) again.
When the typed words agree with the paper, word 12 on the paper is wrong. A wrong word in the run of fuguseed-last(1), or a wrong copy of its word, causes this. Do these steps to correct word 12:
- Throw the YELLOW die and the BLUE die again, and read the two new faces.
- Start fuguseed-last(1) again.
- Type the words 1 to 11 of the paper on the first line.
- Type the new YELLOW face and the new BLUE face on the second line.
- Write the word that the program prints as word 12, in place of the wrong word.
- Run fuguseed-qr(1) again.
The steps after the procedure
Do these steps at the end:
- Read the 12 words on the paper, and compare each word with the sheet.
- Draw the SeedQR with fuguseed-qr(1), and scan it with the camera of the device.
- Compare the words on the device with the words on the paper, word for word, and in the same order. Do this before you use the seed.
- Write the 12 words on the second sheet of paper, and compare the two copies word for word. Keep the two copies in two places.
- Do not type a BIP39 passphrase, and do not accept one from a device. A passphrase makes another seed, and this paper does not hold it.
- Keep the SeedQR drawing and the two copies of the words. Burn or shred every other paper of the procedure, and clear the table.
- Erase the words from the air-gapped computer, and close the program.
Use fuguseed-last(1) for the check word, and fuguseed-qr(1) for the SeedQR. The SeedQR is the form of the 12 words that a consumer, such as FuguPass, reads.
SEE ALSO
STANDARDS
The word list and the checksum come from BIP39, the mnemonic code for the generation of a deterministic key.
AUTHORS
Dick Olsson <hi@senzilla.io>
CAVEATS
The procedure gives no protection against a person who watches you. The dice, the paper, and the sheet hold the seed in plain sight while you work.